Stainless Steel Heating Jacketed Liquid Mixing Tank Homogenizer Tank Emulsifying Tank
1. Introduction of Liquid Mixing Tank .
Mixing tank (pressure vessel is also available)
Application:
Used as liquid storage tank, liquid composing tank, temporary storage tank and water storage tank, etc
Ideal in fields such as foods, dairy products, fruit juice beverages, pharmaceutical, chemical industry and biological engineering etc.
Parameters:
Material: 304 or 316L
Volumn: 500L ~20000L
Agitator: Chinese or European
Single or Jacket (steam or chilling)
Isolation: PU foam or rock wool
Finish: sanitary finish, without dead angle
Configure:
Sanitary manhole, agitator, inlet and outlet, cleaning hole, air vent, etc.
Level gauge
Ladder
2. Technical Parameter :
| Model | 30L | 50L | 100L | 200L | 500L | 1000L | 2000L | 3000L | 5000L | 10000L | 50000L |
| Diameter mm | 300 | 300 | 400 | 500 | 700 | 900 | 1200 | 1300 | 1500 | 1800 | 3100 |
| Height mm | 1600 | 1700 | 2000 | 2300 | 2600 | 3000 | 3800 | 4300 | 4500 | 5300 | 8000 |
| Filling capacity | 65%-80% |
Inside
Pressure Mpa | -0.1---5 |
| Jacket pressure Mpa | -0.1---5 |
| Cool method | By jacket | By pipe |
| Mix speed rpm | 0--300 |
Motor
Power kw | 0.55 | 0.55 | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 13 | 55 |
