High Pressure 2000L Hand Operated Ice Cream Milk Homogenizer (GJB 2-25)
1. Homogenizer Picture and Instruction :
| 1- Lubricate system |
| | Lubricate system which is both squirting and splash uses soft plastic pipes that can bear high pressure and oil. The oil can keep stable temperature at the same producing condition, so it brings excellent lubricate effect. The recycle cooling system reduces driving box's temperature and lubrication waste. |
| 2- Driving box |
| | The eccentric shaft is made of special alloy steel which is wear-resisting and has long using life. The half construction is easy to maintain and be knocked down. Driving and eccentric shafts are drive by v-model gears which have following advantage: low noise and good stability. |
| 3- Wear parts |
| | Homogenizing valve, one-way valve and piston are made of special alloy steel, with high impact resisting corrosion-resisting. This material is applicable to any CIP's corrosion-resisting. In special condition homogenizing and oneway valves can be made of alloy steel which has same function. All kinds of sealing material have following advantage: wear-resisting, non-toxic, pressure-resisting and long life. It is easy and convenient to change wearing parts, especially it is no need to take off pump during changing pistons and sealing rings. |
| 4- Pump construction |
| | The square high pressure covers on the pump have high intensity and excellent sealing function. The tighten nuts with lids have nice out looking. The material gate is according to food sanitation and pharmacy standards. Out-in parts take adjustable tie-in which is easy and convenient to be taken off and fixed. |
| 5- Type |
| | Our homogenizes advantage is good stability and easy to operate, maintain and repair. |
| 6- Saving energy |
| | Our homogenizers arebased on low energy waste and high efficiency designing, which has clear effect at the same producing condition. |
2. Technical Parameter :
| Model No. Technical parameter | GJB2-25 |
| Rated pressure(Bar) | 250 |
| Rated flow(Litres/h) | 2000 |
| Medium temperature(℃) | ≤85 |
| Feeding pipe diameter(mm) | 25 |
| Discharge pipe diameter(mm) | 20 |
| Power of motor(KW) | 15 |
| Volt and Electricity Flow | 380V/50Hz/3Phase |
| Outline dimension(m)Length * width * height | 1.4×1.1×1.42 |
| MATERIAL | Sanitary Stainless Steel 304 |
| Weight(Ton) | 1.25 |
3. Factory and Packing :
Our Services
1. Provide for equipment inspection certificate and manual, to ensure that users properly install and use.
2. Equipment to reach the destination, the company will send engineers to guide installation and
commissioning and customer training until satisfied.
3. The warranty period will be free to customers wearing accessories, after one year warranty period, our
company to provide parts at cost.
4. we provide lifelong maintenance service, including if necessary, to send engineers to the customer at the
service.
